Dormakaba Rose ဇီဝမက်ထရစ်တံခါးသော့ အသုံးပြုသူလက်စွဲ

နိဒါန်း

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dormakaba Rose Biometric Digital Door Lock. Designed for modern access control, this lock offers advanced security features including fingerprint and PIN code access. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your device.

ဘေးကင်းရေးအချက်အလက်

• Ensure all components are present and undamaged before installation.
• Do not expose the lock to direct water or extreme temperatures.
• Use only specified AAA alkaline batteries. Do not mix old and new batteries.
• Keep fingerprints and PIN codes confidential.
• For emergency power, use a Type C USB cable with a compatible power source.
• This lock is designed for internal doors with a thickness of 32-50mm.

ကုန်ပစ္စည်းကျော်view နှင့် အစိတ်အပိုင်းများ

The Dormakaba Rose Biometric Door Lock integrates a fingerprint scanner, a backlit keypad, and a lever handle for secure and convenient access. It is designed for easy installation and reversible for left or right-handed doors.

ပုံ 1: ရှေ့ view of the Dormakaba Rose Biometric Door Lock, highlighting the fingerprint sensor and keypad.

အဓိက အစိတ်အပိုင်းများ-

• လက်ဗွေအာရုံခံကိရိယာ: For biometric access.
• Backlit ကီးဘုတ်- For PIN code entry (6-10 digits).
• Lever Handle: For manual operation.
• ဘက်ထရီအခန်း- Holds 3 AAA alkaline batteries.
• USB-C ဆိပ်ကမ်း: For emergency power.
• Dormakaba 60mm Tubular Deadlatch: Internal locking mechanism.

သတ်မှတ်ချက်များ

တပ်ဆင်ခြင်းနှင့် တပ်ဆင်ခြင်း။

The Dormakaba Rose lock is designed for straightforward installation. It can be installed on both left and right-handed doors. Ensure your door thickness is between 32mm and 50mm.

Figure 2: Dormakaba Rose Biometric Door Lock installed on a door.

တပ်ဆင်ခြင်း အဆင့်များ-

1. တံခါးကိုပြင်ဆင်ပါ Ensure the door is clean and the existing boreholes are compatible with the lock's dimensions. If necessary, drill new holes according to the provided template (not included in this manual, refer to packaging).
2. Latch ကိုတပ်ဆင်ပါ- Insert the dormakaba 60mm tubular deadlatch into the door edge. Secure it with screws.
3. ပေးအပ်ခြင်းကို သတ်မှတ်ပါ- The lock is reversible. Adjust the lever handle direction if needed before final assembly.
4. Mount Exterior Assembly: Feed the spindle and connecting cables through the latch and door. Position the exterior lock assembly.
5. Mount Interior Assembly: Connect the cables from the exterior unit to the interior unit. Align the interior unit with the spindle and secure it to the exterior unit using the provided screws.
6. ဘက်ထရီများတပ်ဆင်ပါ။ Open the battery cover on the interior unit and insert 3 AAA alkaline batteries, observing polarity.
7. စမ်းသပ်ဆောင်ရွက်မှု- After installation, test the lock's mechanical and electronic functions before closing the door.

လည်ပတ်မှုညွှန်ကြားချက်များ

The Dormakaba Rose lock offers multiple access methods and operating modes for enhanced security and convenience.

Initial Setup (First Use):

1. Upon first power-up, the lock will prompt for initial administrator setup. Follow the voice navigation prompts.
2. Register the first administrator fingerprint and/or PIN code. This administrator will have full control over user management.

အသုံးပြုခွင့်မုဒ်များ-

• စံမုဒ်- Requires a single valid fingerprint or PIN code to unlock.
• လမ်းကြောင်းမုဒ်- Allows the door to remain unlocked for continuous access during specific periods. This mode is typically set by an administrator.
• နှစ်ထပ်အသုံးပြုသူမုဒ်- Requires two different valid fingerprints or PIN codes to unlock, providing an extra layer of security.

တံခါးကိုသော့ဖွင့်ခြင်း-

• လက်ဗွေကို အသုံးပြုခြင်း- Place a registered finger on the fingerprint sensor. The lock will verify and unlock if successful.
• PIN ကုဒ်ကို အသုံးပြုခြင်း- Enter your registered 6-10 digit PIN code on the backlit keypad, then press the '#' key. The lock will verify and unlock if successful.

Emergency Power Option:

If the batteries are completely drained, the lock can be temporarily powered using a Type C USB cable connected to an external power bank or adapter. Connect the USB-C cable to the port on the exterior unit, then use your fingerprint or PIN code to unlock.

ထိန်းသိမ်းခြင်း။

Regular maintenance ensures the optimal performance and longevity of your Dormakaba Rose lock.

• သန့်ရှင်းရေး- Wipe the lock surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
• ဘက်ထရီ အစားထိုးခြင်း- Replace all 3 AAA alkaline batteries when the low battery indicator appears or when voice prompts indicate low power. Do not mix old and new batteries.
• လက်ဗွေအာရုံခံကိရိယာ: Keep the fingerprint sensor clean and free of dirt or moisture for accurate readings.
• စက်ပိုင်းဆိုင်ရာ စစ်ဆေးခြင်း- Periodically check that the lever handle operates smoothly and the latch retracts fully.

ပြသာနာရှာဖွေရှင်းပေးခြင်း

This section addresses common issues you might encounter with your Dormakaba Rose Biometric Door Lock.

အာမခံနှင့် ပံ့ပိုးမှု

Your Dormakaba Rose Biometric Door Lock comes with a 1 နှစ်အာမခံ ဝယ်ယူသည့်နေ့မှစ၍ ဤအာမခံသည် ပုံမှန်အသုံးပြုမှုအောက်တွင် ထုတ်လုပ်မှုချို့ယွင်းချက်များနှင့် ချို့ယွင်းချက်များကို အကျုံးဝင်ပါသည်။

အာမခံ ချန်လှပ်ခြင်း-

• Damage caused by improper installation or unauthorized repairs.
• Damage due to misuse, abuse, neglect, or accidents.
• ပုံမှန်မျက်ရည်ယို။
• Damage from natural disasters or power surges.

ဖောက်သည်ပံ့ပိုးမှု-

For technical assistance, warranty claims, or further inquiries, please contact Dormakaba customer support. Refer to your product packaging or the official Dormakaba webလက်ရှိအဆက်အသွယ်အချက်အလက်အတွက် ဆိုက်။

အာမခံအတည်ပြုချက်အတွက် သင်၏ဝယ်ယူမှုအထောက်အထားကို သိမ်းဆည်းပါ။