နိဒါန်း
Thank you for choosing the CIPU 14-inch Sand Filter System. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new pool filter system. Designed for above-ground swimming pools, this system integrates a 14-inch filter tank with a powerful 0.5HP pump, ensuring crystal clear water with ease of use.

ပုံ 1- The CIPU 14-inch Sand Filter System, featuring the filter tank and pump unit, positioned beside an above-ground swimming pool.
The system is portable, operating on 115V, and includes a 6-foot power cord for flexible placement. Its 0.5HP high-efficiency pump ensures quiet operation and effective filtration for pools up to 9500 gallons. The reinforced thermoplastic housing provides corrosion resistance and long-lasting performance in all weather conditions.

ပုံ 2- The filter system is compatible with various above-ground pool types, effectively filtering pools up to 9500 gallons.
ဘေးကင်းရေးအချက်အလက်
Please read all instructions carefully before installing, operating, or performing maintenance on this product. Failure to follow these instructions could result in serious injury or property damage. This product is ETL certified, ensuring it meets recognized safety standards.
အထွေထွေဘေးကင်းရေး ကြိုတင်ကာကွယ်မှုများ
- Always disconnect power to the pump before performing any service or maintenance.
- Ensure the electrical outlet is a grounded, GFCI-protected receptacle.
- ပါဝါကြိုး သို့မဟုတ် ပလပ်ပေါက် ပျက်စီးပါက ပန့်ကို မလည်ပတ်ပါနှင့်။
- Keep children away from the filter system during operation.
- Install the system on a firm, level surface to prevent tipping.
- Do not bury the power cord. Protect it from sharp edges, oil, grease, hot surfaces, and chemicals.
- Never run the pump dry. Ensure the pump is primed with water before starting.
- Consult a qualified electrician for any electrical questions or issues.
Package Contents
စည်းဝေးပွဲမစတင်မီ၊ အောက်တွင်ဖော်ပြထားသော အစိတ်အပိုင်းများအားလုံးကို သင့်ပက်ကေ့ဂျ်တွင် ထည့်သွင်းထားကြောင်း စစ်ဆေးပါ။ အစိတ်အပိုင်းများ ပျောက်ဆုံးခြင်း သို့မဟုတ် ပျက်စီးပါက ဖောက်သည်အကူအညီကို ဆက်သွယ်ပါ။

ပုံ 3- ပေါက်ကွဲသွားတယ်။ view of the sand filter system components, showing all included accessories for assembly.
| Ref. မရှိ | ဖော်ပြချက် | QTY |
|---|---|---|
| 1 | 4-Way Valve | 1 |
| 2 | Flange Clamp | 1 |
| 3 | အို-လက်စွပ် | 1 |
| 4 | Tank filter | 1 |
| 5 | Filter Assembly | 1 |
| 6 | Plug ယိုစီး | 1 |
| 7 | Sand Filter Support | 1 |
| 8 | Screw ST5.5x25mm and Gasket | 4 |
| 9 | အို-လက်စွပ် | 5 |
| 10 | ရေပိုက် Adapter | 5 |
| 11 | Hose Cl ပါamp | 2 |
| 12 | 1 1/4"(32mm)x45cm hose | 1 |
| 13 | 0.5HP Pump (115V-60Hz) | 1 |
| 14 | သဲဒိုင်း | 1 |
| 15 | Pressure Gauge | 1 |
| 16 | Plug W/O-ring 1 1/2# MIP | 1 |
| 17 | Teflon တိပ် | 1 |
| 18 | တိုတောင်းသောဒက်တာ | 2 |
| 19 | Short Adapter Gasket | 2 |
တပ်ဆင်ခြင်းနှင့် တပ်ဆင်ခြင်း။
Follow these steps to properly assemble and install your sand filter system.
ဗီဒီယို 1: A comprehensive guide to setting up the CIPU Sand Filter Pump System for above-ground pools, demonstrating assembly and connection steps.
ကနဦးစည်းဝေးပွဲ-
- Install Drain Plug: Attach the drain plug (6) to the bottom of the filter tank (4). Ensure the O-ring (9) is properly seated for a watertight seal.
- Assemble Multi-Port Valve: Attach the hose adaptors (10) to the 4-way valve (1) ports. Ensure O-rings (9) are in place.
- Load Filter Media: Place the sand shield (14) over the filter tube inside the tank. Carefully add fine silica sand (0.018 to 0.022 inches in size) into the filter tank. The 14-inch tank holds approximately 75 lbs of sand. Fill to the indicated level on the tank.
- ၇-လမ်း အဆို့ရှင် တပ်ဆင်ပါ- Place the 4-way valve (1) onto the top of the filter tank (4), aligning the central pipe. Secure it with the flange clamp (2) and tighten the screws (8) evenly.
- Pressure Gauge ကို ထည့်သွင်းပါ- Screw the pressure gauge (15) into the designated port on the 4-way valve.
- Mount Pump- Secure the 0.5HP pump (13) to the sand filter support (7) using the provided screws (8) and washers.

ပုံ 4- Key components of the 14-inch filter pump, including the 4-way control valve and pressure gauge.
Connecting to Pool:
- ရေပိုက်ချိတ်ဆက်မှုများ Connect the pool hoses (not included, use common 1.5" PVC tubing or discharge hoses) to the pump and filter system. The pump is designed for 1.5-inch threaded pool hoses or 1-1/2" or 1-1/4" pool hoses with clamps.
- Pump to Filter: Connect the pump's discharge port to the
ဆက်စပ်စာရွက်စာတမ်းများ - SFPS14502

CIPU CSPPV546 ပြောင်းလဲနိုင်သော အမြန်နှုန်းပန့် 3HP အသုံးပြုသူလက်စွဲ
CIPU CSPPV546 Variable Speed Pump 3HP အတွက် ပြည့်စုံသော အသုံးပြုသူလက်စွဲ၊ တပ်ဆင်မှု၊ လည်ပတ်မှု၊ ပြုပြင်ထိန်းသိမ်းမှုနှင့် ပြဿနာဖြေရှင်းခြင်းတို့ကို အကျုံးဝင်သည်။ ဘုံဘိုင်အင်္ဂါရပ်များ၊ မောင်းနှင်မှုအင်္ဂါရပ်များ၊ ခလုတ်နှိပ်လုပ်ဆောင်ချက်၊ ဘေးကင်းရေး ညွှန်ကြားချက်များနှင့် နည်းပညာဆိုင်ရာ သတ်မှတ်ချက်များအကြောင်း လေ့လာပါ။
JA-151E Bezdrátová čtečka čipů: တပ်ဆင်ခြင်းနှင့် nastavení
Podrobný průvodce instalací a nastavením bezdrátové čtečky čipů JABLOTRON JA-151E pro ovládání sekcí။ Obsahuje technické parametry, optické akustické indikace a postupy výměny baterií.
ENERGY STAR အသိအမှတ်ပြု Pool Pumps စာရင်း - NHSaves
NHSaves သည် ENERGY STAR certified pool pumps များ၏ ပြည့်စုံသောစာရင်းကို ပေးဆောင်ထားပြီး သုံးစွဲသူများအတွက် စွမ်းအင်သက်သာသော ရွေးချယ်မှုများကို ရွေးချယ်နိုင်ရန် အမှတ်တံဆိပ်အမည်များ၊ မော်ဒယ်နံပါတ်များ၊ ထုတ်ကုန်အမျိုးအစားများနှင့် မော်တာဒီဇိုင်းများကို အသေးစိတ်ဖော်ပြထားသည်။
ENERGY Star Certified Pool Pumps - NHSaves
ဤစာတမ်းတွင် စွမ်းအင်သက်သာသော ရေကန်ပန့်ရွေးချယ်မှုအတွက် တံဆိပ်အမျိုးမျိုး၊ မော်ဒယ်နံပါတ်များနှင့် ထုတ်ကုန်အမျိုးအစားများပါရှိသော ENERGY STAR လက်မှတ်ရ ရေကူးကန်ပန့်များကို သြဂုတ်လ 1 ရက်၊ 2025 တွင် အပ်ဒိတ်လုပ်ထားသည်။