NUUO 210253

NUUO NS-2040 ကွန်ရက် ဗီဒီယို အသံဖမ်းစက် အသုံးပြုသူလက်စွဲ

Model: NS-2040 (P/N: 210253)

1. နိဒါန်း

This manual provides detailed instructions for the installation, operation, and maintenance of your NUUO NS-2040 Network Video Recorder (NVR). Please read this manual thoroughly before using the device to ensure proper and safe operation.

2. ဘေးကင်းရေးအချက်အလက်

မီးဘေး၊ လျှပ်စစ်ရှော့ခ်နှင့် ထိခိုက်ဒဏ်ရာရမှုအန္တရာယ်ကို လျှော့ချရန် ဤအခြေခံဘေးကင်းရေး ကြိုတင်ကာကွယ်မှုများကို အမြဲလိုက်နာပါ-

3. အထုပ်အကြောင်းအရာများ

ပက်ကေ့ဂျ်တွင် ပစ္စည်းအားလုံး ပါဝင်ကြောင်း အတည်ပြုပါ-

4. ကုန်ပစ္စည်းကျော်view

The NUUO NS-2040 is a 4-channel IP Network Video Recorder designed for robust surveillance systems. It supports up to 16 channels with license expansion and features H.264, M-JPEG, MPEG4, and MXPEG compression for efficient video storage.

၂.၁ ရှေ့မျက်နှာပြင်

ရှေ့ view of the NUUO NS-2040 NVR showing the NUUO logo, power button, status indicators, and USB ports.

Figure 4.1: NUUO NS-2040 Front Panel

The front panel features the NUUO logo on the left, followed by two USB 2.0 ports and a reset button. On the right side, there is a circular power button with an LED indicator, and below it, three additional LED indicators for system status (e.g., network activity, HDD activity, alarm status).

4.2 နောက်ဘောင်

The rear panel includes various connectivity ports:

The NVR supports 2 x 3.5" SATA (3GB/s) HDDs internally, with a maximum internal capacity of 8 TB.

5. စနစ်ထည့်သွင်းပါ။

5.1 Hardware တပ်ဆင်ခြင်း။

  1. HDD တပ်ဆင်ခြင်း-

    Unscrew the NVR casing. Install up to two 3.5-inch SATA hard drives into the designated bays using the provided screws. Secure the drives firmly and reattach the casing.

  2. ချိတ်ဆက်စောင့်ကြည့်ခြင်း-

    မော်နီတာတစ်ခုအား NVR ၏ HDMI သို့မဟုတ် VGA အထွက်ပေါက်ပေါက်သို့ ချိတ်ဆက်ပါ။

  3. ကွန်ရက်ချိတ်ဆက်ပါ-

    Connect an Ethernet cable from your router/switch to one of the NVR's RJ45 network ports.

  4. ပါဝါချိတ်ဆက်ပါ။

    Connect the power adapter to the NVR's power input and then plug it into a power outlet.

5.2 ကနဦးဖွဲ့စည်းမှု

Upon first boot, the NVR will guide you through the initial setup wizard. This includes setting up network parameters, date/time, and administrator credentials.

၅။ NVR ကို လည်ပတ်ခြင်း

6.1 တိုက်ရိုက်လွှင့် View

တိုက်ရိုက်ဝင်ရောက်ကြည့်ရှုပါ။ view interface to monitor connected IP cameras in real-time. The NVR supports MultiView presentation and digital PTZ control.

6.2 မှတ်တမ်းတင်ခြင်း။

Configure recording schedules and modes (continuous, motion detection, alarm-triggered).

6.3 Playback and Search

Review မှတ်တမ်းတင်ထားသည်။tage using the playback function. Search options include date, time, event, and camera.

6.4 အဝေးထိန်းအသုံးပြုမှု

Access the NVR remotely via web browser or mobile application (ezNUUO). Ensure proper network configuration and port forwarding if not using ezNUUO.

7. ပြုပြင်ထိန်းသိမ်းမှု

၃.၄ စနစ် အပ်ဒိတ်များ

Regularly check for and apply firmware updates to ensure optimal performance and security. Refer to the NUUO official webနောက်ဆုံးထွက်အပ်ဒိတ်များအတွက် site

7.2 သန့်ရှင်းရေး

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3 ဒေတာ အရန်သိမ်းခြင်း။

အရေးကြီးသော ဗီဒီယိုဖိုင်များကို မှန်မှန် အရန်ကူးယူပါtage to external storage devices or network locations to prevent data loss.

ပြဿနာဖြစ်နိုင်သော အကြောင်းတရားဖြေရှင်းချက်
ပါဝါမရှိ။Power cable disconnected; faulty power adapter.Check power connections; test with another power outlet; contact support if adapter is faulty.
ဗီဒီယိုအထွက်မရှိပါ။Monitor cable loose; incorrect input selected on monitor.Ensure HDMI/VGA cable is securely connected; select correct input source on monitor.
Cannot access NVR over networkIncorrect IP settings; network cable disconnected; firewall blocking access.Verify NVR IP address and network settings; check network cable connection; disable firewall temporarily for testing.
မှတ်တမ်းတင်ခြင်းဆိုင်ရာ ပြဿနာများHDD full or faulty; incorrect recording schedule.Check HDD status and capacity; review recording schedules; replace faulty HDD if necessary.

9. သတ်မှတ်ချက်များ

ထူးခြားချက်အသေးစိတ်
မော်ဒယ်နံပါတ်NS-2040 (P/N: 210253)
ပံ့ပိုးထားသော ချန်နယ်များ4 (expandable up to 16 with license)
Max Recording Resolution၁၂၈၀ x ၇၂၀ (1920P)
Compression FormatsH.264, M-JPEG, MPEG-4, MXPEG
အမြင့်ဆုံးဘစ်နှုန်း80 Mbps
ရလဒ်များကို စောင့်ကြည့်ပါ။VGA၊ HDMI
ကွန်ရက်ချိတ်ဆက်မှုများ2 x 10/100/1000 Base-TX RJ45
USB အပေါက်များ5 x USB 2.0
Internal HDD Bays2 x 3.5" SATA (3GB/s)
Max Internal HDD Capacity8 တီဘီ
RAID ပံ့ပိုးမှုRAID 0၊ RAID ၁
ကွန်ပျူတာစက်လည်ပတ်ရေးစနစ်ပရိုဂရမ်Linux Embedded

10. အာမခံနှင့် ပံ့ပိုးမှု

For warranty information, please refer to the warranty card included with your product or visit the official NUUO website. Technical support is available through NUUO's customer service channels.

NUUO Central Management Software: This NVR integrates with NUUO Central Management Software for comprehensive system management.

ဆက်သွယ်ရန်အချက်အလက်များ: သွားရောက်ကြည့်ရှုပေးပါ။ www.nuuo.com ပံ့ပိုးမှုအရင်းအမြစ်များ၊ မကြာခဏမေးလေ့ရှိသောမေးခွန်းများနှင့် ဆက်သွယ်ရန်အသေးစိတ်အချက်အလက်များအတွက်။

ဆက်စပ်စာရွက်စာတမ်းများ - 210253

အကြိုview NUUO NVRsolo v2.1.5 လိုက်ဖက်ညီမှုစာရင်း
ဤစာရွက်စာတမ်းသည် NUUO NVRsolo v2.1.5 အတွက် ကျယ်ကျယ်ပြန့်ပြန့် လိုက်ဖက်ညီသည့်စာရင်းကို ပံ့ပိုးပေးထားပြီး၊ ပံ့ပိုးထားသော ဟာ့ဒ်ဒရိုက်များ (HDD)၊ မော်နီတာများ၊ ထိတွေ့မှု panels၊ UPS စက်များ၊ DAS သိုလှောင်မှု၊ UPnP ရောက်တာများ၊ ဂျစ်စတစ်များနှင့် web ဘရောက်ဆာများ ၎င်းတွင် ဖိုင်းဝဲမွမ်းမံမှုများ၏ မှတ်တမ်းမှတ်တမ်းတစ်ခုလည်း ပါဝင်သည်။
အကြိုview NUUO Crystal အမြန်စတင်လမ်းညွှန်
NUUO Crystal စောင့်ကြည့်ရေးဖြေရှင်းချက်ကို တပ်ဆင်ခြင်းနှင့် ဖြည်ခြင်းအတွက် အမြန်စတင်လမ်းညွှန်၊ ဖြည်ခြင်း၊ ဟာ့ဒ်ဝဲတပ်ဆင်ခြင်း၊ ဆော့ဖ်ဝဲတပ်ဆင်ခြင်းနှင့် ကနဦးဖွဲ့စည်းမှုတို့ ပါဝင်သည်။
အကြိုview NUUO Titan NVR မှ Crystal သို့ အဆင့်မြှင့်တင်ခြင်း လုပ်ငန်းစဉ်
NUUO Titan NVR စနစ်များကို Crystal V.2.x firmware သို့ အဆင့်မြှင့်တင်ရန် အဆင့်ဆင့်လမ်းညွှန်၊ လိုအပ်သည်များ အပါအဝင် files နှင့် လုပ်ထုံးလုပ်နည်းများ။
အကြိုview NUUO NVRmini 2 အသုံးပြုသူလက်စွဲ- Intelligent Surveillance ဖြေရှင်းချက်
NUUO NVRmini 2 ကွန်ရက်ဗီဒီယိုမှတ်တမ်းတင်စက်အတွက် အသုံးပြုသူလက်စွဲ။ တပ်ဆင်ခြင်း၊ စနစ်ထည့်သွင်းခြင်း၊ ကင်မရာဖွဲ့စည်းမှု၊ မှတ်တမ်းတင်ခြင်း၊ သိုလှောင်မှု၊ ကွန်ရက်ဆက်တင်များ၊ POS ပေါင်းစပ်ခြင်း၊ တိုက်ရိုက်ထုတ်လွှင့်ခြင်းဆိုင်ရာ ပြည့်စုံသောလမ်းညွှန်ချက်များကို ပေးပါသည်။ view, playback, and troubleshooting for intelligent surveillance systems.
အကြိုview NUUO NVRsolo Plus အသုံးပြုသူလက်စွဲ (အဝေးထိန်း)
Comprehensive user manual for the NUUO NVRsolo Plus, detailing installation, configuration, settings, remote access, and advanced features for intelligent surveillance solutions. Learn to set up and manage your surveillance system effectively.
အကြိုview NUUO ဗဟိုစီမံခန့်ခွဲမှုစနစ်ဆော့ဖ်ဝဲလ်တပ်ဆင်ခြင်းလမ်းညွှန်
This guide provides detailed instructions for installing the NUUO Central Management System (NCS), covering system requirements, step-by-step installation of SQL Server 2005 Express, NCS Server, NCS Client, and NCS Matrix, along with configuration steps and cross-time zone management.