1. ကုန်ပစ္စည်းကျော်view
The Gerber Danze DA507348N is a ceramic disc cartridge designed as a replacement part for various Danze single-handle faucets. This component is crucial for controlling water flow and temperature in compatible faucet models, restoring proper function and preventing leaks.
Image 1: The Gerber Danze DA507348N Ceramic Disc Cartridge. This image displays the blue and white ceramic disc cartridge with its stem, ready for installation into a compatible single-handle faucet.
2. သတ်မှတ်ချက်များ
- မော်ဒယ်နံပါတ်- DA507348N
- အမျိုးအစား- ကြွေ disc ကိုအရာတစ်ခု
- လိုက်ဖက်မှု- Designed for Danze single-handle faucets
- ပစ္စည်း- ကြွေ၊ ပလပ်စတစ်
- အတိုင်းအတာများ- 2.25 x 1.25 x 1.25 လက်မခန့်
- ပစ္စည်းအလေးချိန်- ခန့်မှန်းခြေအားဖြင့် 1.45 အောင်စ
- အစားထိုးသည်- Danze model DA507048N
3. Compatible Faucet Models
This ceramic disc cartridge is compatible with the following Danze single-handle faucet models:
- D153244၊ D155040၊ D201014၊ D201244၊ D203112
- D215158၊ D216454၊ D216540၊ D220111၊ D221040
- D222158၊ D223140၊ D223544၊ D403412၊ D403512
- D403612၊ D403712၊ D403812၊ D404214၊ D404444
- D404458၊ D404854၊ D405040၊ D455612၊ D457015
It also serves as a replacement for the older Danze model DA507048N.
4. တပ်ဆင်ခြင်း ညွှန်ကြားချက်များ
Follow these steps to replace the ceramic disc cartridge in your Danze single-handle faucet. It is recommended to consult your specific faucet's manual for detailed disassembly instructions, as designs may vary.
4.1. သင်မစတင်မီ
- ရေပေးဝေမှုကို ပိတ်ပါ- Locate the hot and cold water shut-off valves under the sink and turn them clockwise until fully closed. Open the faucet handle to relieve any remaining water pressure.
- ကိရိယာများ စုဆောင်းပါ- You may need a flathead screwdriver, Phillips head screwdriver, Allen (hex) wrench (often 2.5mm), channel lock pliers, and plumber's grease.
4.2. Removing the Old Cartridge
- Faucet လက်ကိုင်ကို ဖယ်ရှားပါ- Typically, there is a small decorative cap or plug on the handle that conceals a set screw. Carefully pry off the cap and use the appropriate screwdriver or Allen wrench to loosen the set screw. Once loose, pull the handle straight up and off.
- ကာထရစ်ချ်ကို ဝင်ရောက်ကြည့်ရှုပါ- Remove any decorative trim rings or covers to expose the cartridge housing.
- Remove Locking Collar/Nut: The cartridge is usually secured by a threaded collar or nut. This may require channel lock pliers. Turn it counter-clockwise to loosen and remove. Be careful not to damage the threads.
- သံတောင့်ဟောင်းကို ထုတ်ယူပါ- Carefully pull the old cartridge straight out. Note its orientation for reference.
- O-Rings စစ်ဆေးပါ- Ensure that all old O-rings (often three connected in a 'Mickey Mouse ears' shape) are removed from the faucet body. If they remain, the new cartridge will not fit correctly. Clean any grit or mineral buildup from the cartridge housing.
4.3. Installing the New Cartridge
- ချောဆီ (စိတ်ကြိုက်ရွေးချယ်နိုင်သည်) Apply a small amount of plumber's grease to the O-rings on the new cartridge for easier installation and better sealing.
- Cartridge အသစ်ထည့်ပါ- Align the new DA507348N cartridge with the faucet body, ensuring it is seated correctly. Push it firmly into place.
- Secure Locking Collar/Nut: Reinstall the locking collar or nut, turning it clockwise to tighten. Do not overtighten, but ensure it is snug.
- Faucet ပြန်လည်စုစည်းပါ- Replace any decorative trim rings and then the faucet handle. Tighten the set screw to secure the handle.
- ရေပေးဝေမှုကို ပြန်လည်ရယူပါ- Slowly turn the hot and cold water shut-off valves back on.
- စမ်းသပ် Faucet- Check for leaks and verify proper water flow and temperature control.
Image 2: Genuine Gerber Replacement Parts. This logo signifies the authenticity and quality of Gerber replacement components, ensuring optimal product performance.
5. ပြုပြင်ထိန်းသိမ်းမှု
Proper maintenance can extend the life of your faucet and cartridge.
- ပုံမှန်သန့်ရှင်းရေး- Periodically clean faucet components, including the cartridge housing, to prevent mineral buildup. Products like CLR (Calcium, Lime, Rust remover) can be used for this purpose.
- ချောဆီ- If the handle operation becomes stiff, disassemble the handle and cartridge, clean the components, and apply fresh plumber's grease to the O-rings and moving parts of the cartridge.
- ဆောင်းရာသီ- In outdoor faucet applications, ensure the water supply is completely shut off and the faucet is drained during winter months to prevent O-ring damage from freezing.
၃
| ထုတ်ပြန်သည် | ဖြစ်နိုင်သော အကြောင်းတရား | ဖြေရှင်းချက် |
|---|---|---|
| Faucet Leaks After Cartridge Replacement |
|
|
| No Hot Water (or inconsistent temperature) |
|
|
| Stiff Faucet Handle Operation |
|
|
7. အာမခံအချက်အလက်
Gerber products, including this ceramic disc cartridge, are typically backed by a limited lifetime warranty against manufacturing defects. For specific terms and conditions, please refer to the warranty documentation provided with your original Danze faucet or contact Gerber customer support.
8. ဖောက်သည်ပံ့ပိုးမှု
For technical assistance, installation questions, or warranty claims, please contact Gerber customer support. Contact information can typically be found on the official Gerber webဆိုက် သို့မဟုတ် သင့်ထုတ်ကုန်နှင့်အတူ ပါဝင်သော စာရွက်စာတမ်းများတွင်။
You can also visit the official Gerber webပိုမိုသိရှိလိုပါကများအတွက် site: Gerber Store on Amazon
